XBH ENDURANCE CANADIAN EDITION EXCLUSIVE “STANDARD” FEATURES
THE POWER PLANT
- – 52 HP Automotive liquid cooled Chery Engine rated for 500,000 Km
- – Convenient diagnostic engine port
- – Super Torque Single Differential Transmission with convenient top speed of 35km/hr
- – Advanced Driver and Driven Clutch
- – Heavy duty drive belt
THE CONNECTION
- – Double 60 “idler chains” are equipped to supply long and reliable life to the idler axles connecting the transmission to the “drive chains/axles”
- – The chains are equipped with automatic roller/adjusters to prevent chain and sprocket “windup”
- – Each idler axle has three bearings to ensure maximum torque and stability to drive chains. Idler axles are machined not welded !
- – All drive sprockets on axles are double bolted !
THE DRIVE AXLES
- – Eight axles are individually secured to the frame by 8 bearing extensions with large heavy duty outer bearings for axle stability
- – All bearing extensions are sealed to the lower body with cork gaskets and additional black marine silicone
- – 3 water tight bearings per axle on all 8 axles – all drive axles are machined not welded
- – Axles on each side are connected by triple 50 chains for maximum strength
- – Chain tensioners on the drive axles have two, ball bearings with top and bottom rollers
THE BODY
- – ¼’’ thickness throughout complete lower body
- – ¼’’ thickness throughout complete upper body
- – 16 vertical lower body support ribs
- – 12 horizontal lower body support ribs
- – 11mm thick skidplate
UNDER THE HOOD
The engine compartment has been designed with maximized room for service and optimal performance.
The “coated rust proofed” muffler is located directly under the removable exhaust screen for maximum cooling and is equipped with an additional muffler exhaust fan, for extreme conditions and temperatures.
Front left and right grease stations have been added, for easy access to all bearings behind the removable firewall. The firewall is insulated to reduce heat in the driver compartment.
A reliable heavy duty 70 amp alternator will keep the maintenance free battery fully charged and ready for work, while providing continuous power to all of the vehicles electrical features and accessories.
COMFORT AND PERFORMANCE
Easily accessible fans have been added for the brake cooling system and heat extraction system, including dual fans for the radiator and a cab automotive heater kit. The detailed attention given to controlling and optimizing engine temperature, engine compartment temperature and to providing optimum cab comfort will most certainly satisfy the demands of our users.
ELECTRICAL
Includes:
- – Bilge pump with built in float switch and manual dash switch
- – 12 Volt Accessory outlet with combined USB port
- – Automotive wiring harness
- – Low beam High beam head lights
- – Turn signals
- – Horn
- – 4 way Emergency Flashers
- – Brake lights
- – Red Engine stop switch
- – Analog Gauges ( Fuel, Temperature, Speedometer, Trip meter)
- – Built in rechargeable dash mounted Nebo transport flashlight
ADDITIONAL STANDARD FEATURES
- – Super smooth throttle twist grip
- – Rear mounted fuel tank for better weight distribution especially in the water
- – Hand rails
- – Helicopter lift kit
- – Trailer hitch
- – 4000 lb power winch kit
- – Brush guard
- – Heavy duty greasable outer bearings
- – Checker plate aluminum flat sub floors that fit tight to lower body protecting chain area from debris
- – Tool kit
Check out our sales sheet!
WE LISTENED, WE DELIVERED
THANKS CANADA
Check out our sales sheet
